Table of Contents
About Aluratek
They produce goods for everyday use. Technology should make life simpler, whether it’s a portable battery charger for your smartphone, the integration of their SmartHome accessories into your house, or a digital photo frame to liven up your living room. Their products are made to improve your life at home, at work, and on the go.
When a group of seasoned business people decided to launch attractive items in the consumer electronics sector, our journey officially began in 2006. Their company’s roots began with networking goods before expanding into the market for digital photo frames, where they are still a leader today. Throughout the United States and Canada, dozens of reputable merchants and resellers sell Aluratek products.
Your order has been carefully packaged and inspected. The following accessories should be included in your package. Please inspect the contents of the package to ensure that you have received all items and that nothing has been damaged. If you discover a problem, please contact us immediately for assistance.
| Control Functions | |
| Function | Operation |
| Power ON | When OFF, press and hold the Power Button for 3 seconds until the blue LD flashes |
| Power OFF | When ON, press and hold the Power Button for 5 seconds until the red LED flashes |
| Pairing | When powered on, press the Power Button twice to start pairing (LED flashed red and blue) |
| Mode Switch | Slide the Mode Switch to and from TX and RX |
| Play / Pause | In RX mode, press the Power Button once to play / pause music |
Note: Please wait 3 seconds after ABC01F is powered OFF to switch the mode. After the switch, the pairing history of the previous devices will be cleared. You will need to re-pair your Bluetooth devices to ABC01F after you switch between TX / RX mode.
| LED Indicators | |
| LED Indicator | Status |
| Solid Red LED | Charging |
| LED OFF | Power OFF / Fully charged if connected to a power source |
| Flashing Red and Blue | Pairing in Transmitter / Receiver Mode |
| Flashing Red | Low battery |
| Solid Blue LED | Successfully paired |
| Flashing Blue (Every 2 Seconds) | Powered on but not paired with Bluetooth devices |
Note: For first-time use, once powered on, the adapter will automatically enter pairing mode. After 10 seconds, the LED will flash blue and red. Please follow the instructions below on how to pair.
Please make sure the device supports the A2DP profile. The pairing procedure will vary depending on the actual device. Please refer to the user guide of your device for detailed instructions.
The general pairing procedures are as follows:
Note: The pairing mode will last 3 minutes. ABC01F will switch to standby mode automatically if no devices can be connected within 5 minutes.
Note: After the initial pairing of your Bluetooth device with ABC01F. It is recommended that you power on your Bluetooth device first before you power on ABC01F for subsequent uses for faster reconnection. If the device does not reconnect, you may press the power button to speed up the process.
Pairing in Receiver Mode
Please make sure the device supports the A2DP profile. The pairing procedure will vary depending on the actual device. Please refer to the user guide of your device for detailed instructions.
The general pairing procedures are as follows:
Note: Please make sure the audio output of your device is set to Bluetooth for audio streaming.
Pair with two devices at the same time in TX mode
In TX mode, the adapter is able to pair with two Bluetooth stereo headphones/speakers at the same time.
The battery is not fully charged and it is highly recommended that you charge ABC01F before you begin using it.
Note: Using ABC01F “out of the box” will not harm the device. You will experience reduced battery life as the unit will not be fully charged. Connect the larger USB end of the cable provided to your PC or USB power adapter (not included) and the smaller Micro USB to the charging port of ABC01F. Please charge the battery for a minimum of (2) hours. The red LED will be on while charging. When charging is complete, the red LED will turn off.
Using ABC01F With Power Connected
Here are the steps to follow if you want to use ABC01F with power connected. ABC01F will stay in standby mode as long the power is connected so your Bluetooth device can reconnect automatically after you are within range.
WARNING. This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by whatever measures may be required to correct the interference.
Aluratek warrants this product against defects in material or workmanship for 1 Year from the date of purchase.
This warranty becomes invalid if the factory-supplied serial number or “warranty void” sticker has been removed or altered on the product.
This warranty does not cover:
IN NO EVENT SHALL ALURATEK’S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFTWARE, OR ITS DOCUMENTATION.
Aluratek makes no warranty or representation, expressed, implied, or statutory, with respect to its products, contents, or use of this documentation and all accompanying software, and specifically disclaims its quality, performance, merchantability, or fitness for any particular purpose. Aluratek reserves the right to revise or update its product, software, or documentation without obligation to notify any individual or entity.
If you need further assistance, please contact the Aluratek support department for troubleshooting prior to returning this device.
For the ideal configuration, simply connect the transmitter using the provided 3.5 mm or RCA Y-cable. With the transmitter’s power ON/OFF button and integrated rechargeable battery, you may enjoy wireless audio transmission for up to 10 hours at a distance of 33 feet.
Make sure that the distance between the two of your devices is reasonable. The transmitter will likely need to be powered on and placed in pairing mode. You should now be able to pair the Bluetooth transmitter and receiving device, and you will be connected.
You can perform the slideshow without wifi once it has been stored to the internal memory.
Utilize an active computer USB port or any USB charging adapter to connect to the charging port. Automatic charging will begin when the LED light turns red. The LED light turns off when the transmitter is fully charged.
PSK is the pulse-shift keying modulation used for sending audio over Bluetooth. The digital audio of the linked device serves as the PSK modulating signal. This modulating signal changes the carrier wave’s phase at a set frequency. It accomplishes this by timing the variation of the sine and cosine inputs.
Consider transmit power as being similar to your voice’s volume. The farther away someone can hear you, yet the more energy it requires, the louder you speak. The transmit power range supported by Bluetooth® technology is -20 dBm (0.01 mW) to +20 dBm (100 mW).
Streaming audio and video is a crucial component of a wireless network. Mobile users can send and receive video feeds on tiny, portable devices by using Bluetooth.
Your preferred analog or digital audio system can be equipped with a Bluetooth receiver, enabling you to stream your phone’s music library and podcasts directly to the speaker.
For more manuals by Aluratek, Visit Manualsdock
